Using a Tablet at the Counter for Loyalty Points: Steps and Checks
By Alva Chew, founder of Stridec · Updated
In short A loyalty tablet at the counter works if staff can add points in a few seconds and customers can join with one scan. Before you buy a tablet, check what the loyalty software asks of the staff device. Gimify documents staff adding or redeeming points on any phone at the counter, and its free plan covers one outlet, so you can test your own device before you pay anything.
Can you use a tablet at the counter for loyalty points?
Yes, as long as the loyalty software works on the device and the device suits the counter. A tablet is only a screen. What matters is whether staff can find a member and add points in a few seconds, and whether a customer can join without anyone typing for them.
Most owners who search for a loyalty tablet at the counter are picturing one of two things. The first is a tablet that staff use to add and redeem points. The second is a tablet that customers use to sign themselves up. They are different jobs, and it helps to decide which one you want before you buy anything.
This page is for the owner who is close to choosing. It walks through what a shop does from the first day to the first earned point, and where a tablet fits. It only describes Gimify’s flow as far as Gimify has documented it. Where something is not documented, the page says so.
Which job should the tablet do?
There are three setups, and each has a cost.
| Setup | What it means | Trade-off |
|---|---|---|
| Staff phone only | Staff add and redeem points on a phone they already own or carry | No hardware to buy, but the phone leaves the counter when the person does |
| Staff tablet at the till | A tablet fixed next to the payment point that staff use for points | One shared screen for every shift, but you buy it, charge it and secure it |
| Customer sign-up tablet | A tablet customers use to type their own details | Slows the line, and one device is shared by strangers |
For most counters the third setup is the weakest. Typing an email on a shared screen takes longer than scanning a code with your own phone, and the person behind in the queue waits. A printed or displayed QR code does the same job with no shared device. The guide on QR code loyalty programs covers where to put the code.
The second setup is the one a tablet suits best. A fixed screen at the till means any member of staff can pick it up without asking whose phone it is, and the points step happens in the same place as the payment.
What does the customer do?
On Gimify the customer steps are short and need no app.
- The customer scans the QR code at the counter.
- They enter their email.
- They are a member. There is no form, no app download and no password.
- Later, they sign in with a one-tap email link.
- They can save the member card to Google Wallet. The card is the QR code that staff scan. See Google Wallet for the format.
The points balance shows in the member’s web card on their phone. It does not show on the Wallet pass, which carries the QR code and the member name only.
Because all of this happens on the customer’s own phone, the tablet is not needed for sign-up. That leaves the tablet’s only job as the staff side.
What does staff do at the till?
The staff step on Gimify is to add or redeem points on any phone at the counter. Points are earned in proportion to the purchase amount, so the member is looked up through their card, the staff member reads the bill amount, and the points go on.
Gimify’s documentation describes a phone at the counter. It does not document a tablet app or a tablet-specific mode, and this page does not claim one. If you want a tablet to be the staff device, the sensible way to find out is to try it. Open the staff side on your tablet during a quiet hour on the free plan and run five or six transactions with your own staff. You will learn more from that than from any spec sheet.
Because the counter device is separate from your till, you do not need to connect anything to your payment system. The guide on running a loyalty program without POS integration explains the routine and the trade-off, which is one extra step per sale.
What are the steps a shop takes?
In order, from nothing to the first earned point:
- Decide the points rule. One sentence a customer can repeat, such as 1 point for every US$1 spent. How to set your points earn rate helps you cost the first reward.
- Create your free loyalty program. Gimify’s merchant sign-up is self-service at app.gimify.com/start. The free plan covers one outlet and unlimited members, with no time limit.
- Choose your counter device. Start with a phone staff already have. If you want a tablet, test it now, before you buy a stand or a case.
- Put the QR code where customers pay. Print it and place it at eye level near the till. Customers scan it with their own phone.
- Give staff one sentence to say. Something short, said at the moment of payment. How to launch a loyalty program at the counter covers the script and the quiet-hours launch.
- Run the first transactions yourself. Add points on the device, redeem a small reward, and check the member’s card shows what you expect.
- Widen to the rush. Move to busy hours once staff stop hesitating.
This page does not describe the screens inside Gimify’s merchant dashboard, because they are not documented here. Go through step 2 and look at them yourself.
What should you check before you buy tablet hardware?
A short list, in the order that tends to catch problems.
- Does it run the software? Open the staff side on the tablet and confirm you can find a member and add points.
- Can staff reach it? Put it where the person taking payment can touch it without turning around.
- Does it last a shift? Leave it on for a full day at normal brightness and see where the battery ends up.
- Is it secure? A tablet on a counter can be picked up. A stand with a lock, or a habit of storing it at close, is worth the small cost.
- What happens when the Wi-Fi drops? Ask yourself whether you can wait a minute and add points after, and write down what staff should do.
- Does it add a step? If staff now handle the till, the tablet and a phone, you have made the counter slower, not faster.
Staff turnover is the reason to keep it simple. A new hire should be able to learn the points step in one short walk-through, with no logins to remember beyond the ones you give them.
How do you keep points honest on a shared counter device?
A device that every staff member uses is also a device any of them can misuse. Keep one rule: points go on against a real bill, with the amount taken from the receipt, and never from what a customer says. Check what was added at the end of each shift in the first fortnight. Loyalty fraud at the counter lists the common patterns and the checks that catch them.
Is a tablet worth it?
If a phone works, a tablet is a convenience and not a requirement. Buy one when you have a counter where phones keep wandering off, where several people share the till, or where you want one fixed place for points. Do not buy one to solve a sign-up problem, because customers sign up on their own phones.
The cheapest way to decide is to run the program first on a device you already have, see where it slows down, and spend on hardware only if it does.
What does this look like on Gimify?
Gimify is a points-only loyalty program. Customers join by scanning a QR code and entering their email, with no app and no password, and staff add or redeem points on any phone at the counter. The free plan covers one outlet with unlimited members and has no time limit, so you can try your tablet on a real counter before you pay for anything. You can compare plans in free loyalty program apps, or start free.
Questions owners ask
Do I need a tablet to run a loyalty program at the counter?
No. What you need is a screen staff can use to find a member and add points, and a QR code customers can scan. Gimify documents staff adding or redeeming points on any phone at the counter, so a tablet is optional.
Can customers sign up on the tablet itself?
They can, if the sign-up page opens in the tablet's browser, but it is usually quicker for customers to scan a QR code with their own phone. That keeps the tablet free for staff and stops a queue forming behind someone typing an email.
What should I check before buying a loyalty tablet?
Check that the loyalty software works on the tablet, that the screen is easy to reach from the till, that the device stays charged through a full shift, and that you can test it on a free plan before committing to hardware.
Does Gimify have a tablet app?
Gimify does not ask customers to download an app, and it documents staff using any phone at the counter. This page does not claim a dedicated tablet mode. Try your own tablet on the free plan and see whether it suits your counter.
How do customers join without an app?
They scan the QR code, enter their email and are in. They sign in later with a one-tap email link. The member card can be saved to Google Wallet, and the points balance shows in their web card.
How do I stop staff adding points they should not?
Keep one routine: points go on only against a real bill, with the amount read from the receipt. Check the activity at the end of a shift. Our guide to fraud at the counter covers the common patterns.
Read next
Start free
Gimify is free for one outlet with unlimited members and no time limit. Unlimited outlets are one flat monthly price.
Start free See plans