Guides

Counter Signage That Gets Customers to Join Your Loyalty Program

By , founder of Stridec · Updated

In short Counter signage gets customers to join when it sits where they stand while paying, carries one line about what they earn, and has a QR code printed with a clear four-module margin. Pair the sign with a spoken ask from staff, because a sign only gives people a way to say yes. Test the printed sign on two different phones before you print a batch.

What should counter signage for a loyalty program do?

Counter signage has one job: let a customer who is already willing to join do it in a few seconds, standing where they are. It does not have to explain the program. It has to show what they get, show where to point the phone, and stay readable from the spot where they wait.

Most signs that fail do so for ordinary reasons. The code is too small, it sits somewhere nobody stands, the message has three lines of rules, or the printed code will not scan. All of these can be checked with a phone in about five minutes, before you print anything.

This guide covers what to write, where to put the sign, how to print the code so it reads, and how the sign works with the staff ask. For the full launch plan, see how to start a loyalty program in a busy shop. For the wider question of getting people to join, see how to get customers to join your loyalty program.

What should the sign say?

Three things, in this order, and nothing else.

  1. The benefit. What the customer gets on this order. “Scan to earn points on every order” names a result. “Join our loyalty program” names a task.
  2. The action. “Scan with your phone camera.” Customers know how to scan, but a short instruction removes doubt for those who do not.
  3. The code. Large, with space around it.

If you offer a welcome balance, put it on the sign as a number. The reasoning is in loyalty sign-up bonus. Keep the earn rule off the sign unless it fits in one short line, because a customer reading small print at the till is a customer holding up the queue.

IncludeLeave off
One line on what the customer earnsTerms, expiry rules and exclusions
“Scan with your phone camera”Instructions about downloading an app, since none is needed
The QR code, large, with a clear marginA second code, a web address and a social handle all competing
One welcome number if you offer oneTiers, stamps or vouchers, which add rules to learn

Keep it to points. A sign that mentions a points rule, a stamp rule and a birthday voucher asks the customer to learn three things before the first scan. A single points balance is one line.

Where should the sign go at the counter?

Where the customer is standing still with a phone nearby. In a shop that is three places.

  • At the payment point. Beside the terminal or on the counter facing the customer. This is where the staff ask happens, so the sign confirms what was just said.
  • Where people wait for their order. A pickup shelf or the counter edge. Customers waiting for a coffee or a bag have a minute with nothing to do, and a phone in their hand.
  • On the order tray or receipt. For the customer who said “next time”, so the code goes home with them.

A code on the door or the menu board is read by people who are walking, not by people who are paying. Table tents and menus suit sit-down service, where the customer is already seated.

Put the sign at eye height or on the counter surface, angled up toward the customer. Do not put it behind the till screen, behind glass that reflects the ceiling lights, or below the line of sight of someone standing in a queue. Stand where the customer stands, in the real queue, and check you can read it.

How do you print a QR code so it scans?

Follow the code’s own printing rules. Denso Wave, the company whose team released the QR code in 1994, publishes them on qrcode.com.

RuleWhat Denso Wave saysSource
Margin“QR Code requires a four-module wide margin at all sides of a symbol.” Also called the quiet zone, a clear area where nothing is printedDenso Wave, code area
Size“It is recommended that QR Code symbols be printed as large as possible within the available printing area.” Larger modules are more stable and easier to readDenso Wave, module size
Print resolutionEach module should be made up of 4 or more dots for stable operationDenso Wave, module size

Source: Denso Wave pages above, read 20 November 2026.

In practice:

  • Do not crop the margin. A sign designer who trims the white border to fit a frame has removed the part the scanner needs. If your sign has a coloured background, put the code on a white panel with at least a four-module border.
  • Print it big. Use the largest space you can without crowding the benefit line. A code the size of a postage stamp is a test of the customer’s patience.
  • Print at a high resolution. Export the code from your loyalty software as a vector or a large image, not as a screenshot of a screenshot.
  • Keep the code flat. A code curved around a bottle or creased across a fold may scan, but it is the first thing to fail.

On wear, Denso Wave states that error correction at level M restores 15% of the code and is the level most often chosen (Denso Wave, error correction, read 20 November 2026). That helps with minor scuffs. It is no reason to leave a laminated sign to peel for a year. See the QR code glossary entry for how the code works.

How do you test the sign before you print a batch?

Run the same four checks every time you change a sign.

  1. Scan it from the customer’s spot. Stand at the counter, not at your desk, and scan the printed sign with your own phone camera.
  2. Scan it on two phone brands. An iPhone and an Android phone cover most customers. Phones differ in how fast their cameras focus.
  3. Scan it in the real light. Check in the afternoon sun, under the spotlights and in the evening. Glossy lamination throws reflections that a screen preview never shows.
  4. Complete the join. Finish the sign-up on your phone and confirm you land on a card with points. A code that scans to an error page is worse than no code.

Smartphones are not the barrier in most markets. Pew Research Center reports that 91% of US adults own one.

FindingScopeSource
91% of adults own a smartphoneUS adults, 5,511 surveyed 30 January to 18 June 2026Pew Research Center, Mobile Fact Sheet, 19 October 2026

Ownership figures in other countries differ, so check your own market before you assume the same. The sign is for customers who have a phone with them, and at a counter that is nearly everyone who is paying.

Why does a sign still need a person?

Because a sign lets a customer start, and a person gets them to decide. No independent public figure we could verify says how much a sign adds on its own, so we quote none. What we can say is that a sign lets a customer start, while a person asking makes them decide. The sign works best when someone points at it.

A workable split:

  • Staff ask once, at payment: “Want points on this order? Scan this and they’re yours today.” Then they point to the sign.
  • The sign carries the join. The customer finishes it on their own phone while the order is made.

This keeps the till moving. The ask takes a few seconds, and the scan happens after payment, off the critical path. Tell staff that a no is fine and that they should not repeat the ask.

How do you know the sign is working?

Count new members and transactions each shift, and divide members by transactions. No independent public figure tells you what share of customers join a small shop’s program, so ignore any benchmark you are quoted and compare your own weeks.

Change one thing at a time. Move the sign, or change the line, or enlarge the code, but not all three together. Give each change a week of normal trade before you judge it. A week that includes a public holiday or a rainy spell will mislead you, so compare like with like.

If sign-ups stay low after the sign is readable, well placed and backed by an ask, the weak point is probably the reward or the staff routine, not the print. Why customers ignore loyalty programs covers the other causes.

What does this look like on Gimify?

On Gimify the customer scans the QR code, enters an email and gets a points card, with no form, no app download and no password. The card can be saved to Google Wallet, and the points balance shows on the member’s web card on their phone. The free plan covers one outlet with unlimited members and has no time limit, so you can print a sign, test it at the counter and change it as often as you like before you pay anything.

Questions owners ask

What should loyalty program counter signage say?

One line that states what the customer earns, one short instruction to scan, and the QR code. For example: Scan to earn points on every order. Keep the rule to a sentence the customer can repeat, and leave the terms for the web card.

Where should I put the QR code at the counter?

Where the customer stands or waits: beside the payment terminal, on the counter facing the customer and on the order pickup point. A code on the door or the menu is scanned less because nobody is standing still there.

How big should the QR code be?

As large as the sign allows. Denso Wave, the inventor of the QR code, recommends printing it as large as possible and at least 4 dots per module. Test the printed sign from the distance a customer actually holds their phone.

What margin does a QR code need?

Four modules of empty space on every side, which Denso Wave calls the quiet zone. Do not crop it, put a frame through it or print text inside it.

Do customers need an app to scan the code?

No. Customers scan with their phone camera. On Gimify they then enter an email, with no form, no app download and no password.

Is a sign enough on its own?

Usually not. A sign lets a customer say yes, but a person asking makes them decide. Have staff ask once at payment and point to the code, then use the sign to carry out the join.

Read next

Start free

Gimify is free for one outlet with unlimited members and no time limit. Unlimited outlets are one flat monthly price.

Start free See plans